View Single Post
  #7  
Old 09-18-2012, 12:26 PM
MPittma100's Avatar
MPittma100 MPittma100 is offline
XS-XJ Guru
 
Join Date: Aug 2011
Location: Atlanta, GA.
Posts: 2,283
Wiring

In the multi-conductor connector for the regulator/rectifier located under the seat, there is a larger red wire. Disconnect the two halves of the connector and check the spade/pin terminals for corrosion, etc. Especially those for the larger red wire. The pin connectors for this wire have a tendency to fail as they are carrying a lot of amperage.

If toasted, the simply fix is to go around the connector and use a crimp/butt connector to tie the red wires back together outside of the OE connector.

MP
__________________
1981 XS1100H Venturer
K&N Air Filter
ACCT
Custom Paint by Deitz
Geezer Rectifier/Regulator
Chacal Stainless Steel Braided Brake Lines
Chrome Front Rotor & Caliper Covers
Stebel Nautilus Horn
EBC Front Rotors
Limie Accent Moves On In 2015

Mike
Reply With Quote