View Single Post
  #1  
Old 06-15-2014, 06:03 PM
cushride cushride is offline
New
 
Join Date: Feb 2008
Location: Seattle
Posts: 9
Zero voltage reading on black/white to ground during TCI unit voltage test

Hi,

Doing TCI unit voltage test per manual on 79 XS11F.

I see required 12V on four wires but on Black/White to ground, where I should see 6V, I get nothing.

Does this tell me, or anyone, something specific, or just point me to need to trace that Black/White wire back to source and continue from there?

I'm guessing the later and will continue down that path, but, am also hoping for magical pointer or answer as to what 0V reading on this wire means to me.

Thanks for any info!
Reply With Quote