View Single Post
  #2  
Old 06-15-2014, 07:45 PM
CaptonZap CaptonZap is offline
XS-XJ Guru
 
Join Date: Jun 2010
Location: Denver
Posts: 1,748
The Blk/wht wire goes to the emergency stop switch. There is a diode inside the TCI that the current goes through to get to that terminal. If you have 12 volts at the red/wht wire, and you have some voltage at two of the wires in the 4 conductor plug, (I don't have a way to tell you which two, try all 4 to ground, and two of them should show some voltage with the key on), then chances are that the diode is open. That is not a deal breaker, it just means that the stop switch will not work, since if the current can flow through the diode to the kill switch then to ground, it will kill the ignition. If it can't flow through, since the diode is open, you cannot kill the ignition with the emergency stop switch.

Let me know what you find.

CZ
Reply With Quote