XS11.com Forums

XS11.com Forums (http://www.xs11.com/forum/index.php)
-   XS11/XJ11 Discussion (http://www.xs11.com/forum/forumdisplay.php?f=2)
-   -   How to plumb the xs11s carbs? 4 Nipples? (http://www.xs11.com/forum/showthread.php?t=40537)

jrobertfox 08-14-2013 08:18 AM

How to plumb the xs11s carbs? 4 Nipples?
 
I completely forgot how this went together... Although I do remember when I bought the bike there was a tube that connected one petcock to the other.

See this diagram:
https://lh4.googleusercontent.com/-c...1-no/carbs.png

I remember the hoses connected to the bottom nipples, but don't remember anything with the top.

Are the lines in red the desired configuration? One pair to each side of the tank? This is with a pod set up/ and seemingly no vacuum fuel distribution thing that the manual indicates. And then what of the original cross over tube?

Any help would be much appreciated. :)

bikerphil 08-14-2013 08:22 AM

Top T's are bowl vents, open to atmosphere or connected to your airbox, lower T's are fuel inlets. Run your left fuel tap line across and down to the right fuel inlet and right tap to the left inlet.

jayel 08-15-2013 11:36 AM

I like to run a H pattern a couple of tees where the crossbar meets the legs of the uprights, either tap will feed both sides


All times are GMT -6. The time now is 09:38 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.

Integrated by BBpixel ©2004-2022, jvbPlugin