View Single Post
Old 08-06-2011, 05:24 AM
Gallaecus's Avatar
Gallaecus Gallaecus is offline
XStremely XSive
Join Date: May 2011
Location: East Haven Connecticut
Posts: 248
I guess it "wasnt" written in japanese, sorry, my bad, must have been the rum and cokes talking. the original jets were 110's across the board so I put them back in.

The only thing i used from the rebuild kits were the float needle and seat.

I wanted to replace the pilot screw but they look fine and I didnt want to unseat the washer, spring, etc,

initially I cleaned the carbs and put them back, 3 out of 4 idled just fine but the bike stalled with any twist of the throttle. the only difference this time is that I drilled out the passage in the float bowl. (the passage that draws from the bottom of the bowl) its not clogged now!!!

hope it works now

1981 XS 1100 LH
1979 XS 1100 SF
Reply With Quote