View Single Post
  #4  
Old 08-22-2010, 08:13 PM
clcorbin clcorbin is offline
XStremely XSive
 
Join Date: Jan 2010
Location: Albuquerque, NM
Posts: 495
You where right Phil. 7 of the 8 "tanks" had the outside end pushed in. I'm going to see if I can use hot air to pop them back out. If now, I'll drill a small hole in the edge and use compressed air to push them back out then solder them closed again.

I'm surprised it could build up enough pressure to collapse those tank with the bowl drain screws out. Live and learn!
__________________
-- Clint
1979 XS1100F - bought for $500 in 1989
Reply With Quote