#1
|
|||
|
|||
Brake disk swap
Anybody know if disks from a 81xs11h will work on a 79f?
__________________
79 XS11 F |
#2
|
||||
|
||||
Yes, you can mix and match disks from any XS11. Bolt pattern and setback are all the same. The "newer" disks have slots in them, but drilling a few holes with a carbide bit will also work. I found a pattern on here, and drilled the solid rotors on my '79 so it would stop better in the rain.
__________________
Ray Matteis KE6NHG XS1100 E '78 (winter project) XS1100 SF 1977 450SL Retirement winter vehicle |
#3
|
|||
|
|||
Disks
That's the reason I'm asking g, I don't have the patience for drilling myself nor do I have the means right now. Just wanted to know if they would swap before I wasted my hard earned allowance. Kids are expensive....lol thanks a ton
__________________
79 XS11 F |
#4
|
||||
|
||||
They will swap. And the right front and rear are same part.
__________________
1981 XS1100H Venturer K&N Air Filter ACCT Custom Paint by Deitz Geezer Rectifier/Regulator Chacal Stainless Steel Braided Brake Lines Chrome Front Rotor & Caliper Covers Stebel Nautilus Horn EBC Front Rotors Limie Accent Moves On In 2015 Mike |
#5
|
|||
|
|||
Disks
This is why I've enjoyed this site so much, everyone is willing to pitch in and help a guy out with all thier questions. This ol bike has been a adventure, and I've acquired a 77 xs750 triple for $50. I'm not going to stop with any of these vintage bikes, grampa used to say sometimes you find a diamond in a goats a$$, he was a bit of a crude man but he's got a point. Thanks again for the know how, I'm sure I'll have more questions later.
__________________
79 XS11 F |
#6
|
||||
|
||||
Quote:
![]()
__________________
Skids (Sid Hansen) Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation. 03 Honda ST1300 ABS |
![]() |
Thread Tools | |
Display Modes | |
|
|